User`s guide

BreezeNET DS.11 Series User’s Guide
2-18
Installing the Indoor Unit
Route the Indoor-to-Outdoor cable into the building so that it
conveniently reaches the indoor unit while avoiding
interference sources. It is recommended that the cable be a
little longer then necessary. The cable is supplied open
ended so it can be conveniently threaded as shown into the
building.
1. The unit can be placed on a desktop or a shelf.
Alternatively, it may be wall-mounted. The drilling
template included with the unit can be used to simplify
the wall installation process.
2. Assemble an RJ-45 connector with a protective cover on
the indoor side of the Indoor-to-Outdoor cable. Refer to
Appendix B for instructions on preparing the RJ-45
cable connector.
3. Connect the Indoor-to-Outdoor cable to the Radio
connector, located on the top panel of the indoor unit
shown in Figure 2-6 on page 2-20. The Indoor-to-
Outdoor cable should be connected to the unit before
the unit is connected to the mains power.