User`s guide

Installation
2-15
Connecting the Ground and
Antenna Cables
The Ground terminal (marked ) is located on the bottom
panel of the outdoor unit. The Antenna RF connector
(marked
) is located on the top panel of the BU-DS.11D
outdoor unit.
NOTE:
In DS.11 units with two antenna connectors, always use the connector
marked - 1.
1. Connect one end of the grounding cable to the Ground
terminal and connect the other end to a good ground
connection.
2. For DS.11D units, connect an RF cable between the
antenna connector and the antenna.
Connecting the Indoor-to-
Outdoor Cable
The following steps and figure illustrate how to connect the
indoor-to-outdoor cable.
1. Remove the two screws holding the waterproof seal to
the outdoor unit and remove the waterproof seal.
2. Unscrew the top nut from the waterproof seal.