User manual

Chapter 3 - Layer 2 Command Set - PHY and MAC MINT (“mint” command)
Alvarion BreezeNET B130/B300 GigE 59 Operational User Manual
 fixedbitr - sets fixed bitrate for the node
 minbitr XXX - minimum bitrate for operation in "autobitrate" mode
 autobitr [+/-dB] - operation mode with automatic bitrate control. [+/-dB]
parameter allows to manage bitrate control sensitivity.
 enable | disable | delete - enables, disables or deletes the profile.
Syntax:
mint IFNAME roaming {leader | enable | disable}
mint IFNAME profile N [-freq X[,Y,N-M,...] | auto] [-sid
X[,Y,..]] [-bitr X]
[-band {double | full | half | quarter}]
[-type {master|slave}] [-key XXX] [-nodeid N]
[{-minbitr XXX [-autobitr [+/-dB]] | -fixedbitr}]
[enable | disable | delete]
Samples:
mint rf5.0 profile 1 -freq 5920 -sid ABCDE
mint rf5.0 profile 2 -freq 5960 -sid ABCDE disable
mint rf5.0 roaming enable
3.2.9 Remote Command Management
Remote command management allows one MINT node to perform commands on
one other or all MINT nodes in the network.
Options:
 -rcmdserver {disable | enable} - disables/enables remote control
management mode (enable by default)
 -guestKey STRING - guest key. Guest key allows to perform read only
commands on the node
 -fullKey STRING - full key. Full key grants full access to the node (all
commands can be performed)