User manual

Chapter 3 - Layer 2 Command Set - PHY and MAC MINT (“mint” command)
Alvarion BreezeNET B130/B300 GigE 42 Operational User Manual
3.2 MINT (“mint” command)
3.2.1 General Description
MINT - Microwave Interconnection NeTworks - architecture gives a
functionality to present a radio interface of a unit (as well as a network connected
to it) as a traditional Ethernet in a bus topology. Therefore the unit can have
several Ethernet interfaces and several pseudo-interfaces (tun, ppp, null etc). Any
of Ethernet interfaces can be united in bridging groups which consist of two or
more interfaces. Moreover, routing mode can also be used.
Full syntax:
mint IFNAME -type {master | slave}
mint IFNAME -mode {mobile | nomadic | fixed}
mint IFNAME -nodeid NUMBERID
mint IFNAME -name NAME
mint IFNAME -key SECRETKEY
mint IFNAME -authmode {public | static | remote}
mint IFNAME -[no]authrelay
mint IFNAME -[no]snmprelay
mint IFNAME -[no]autobitrate [+/-DB] | -fixedbitrate
mint IFNAME -minbitrate XX
mint IFNAME [-loamp XX] [-hiamp XX]
mint IFNAME -[no]crypt
mint IFNAME -airupdate {disable | {[active | passive]|force}}
[fast|normal|slow]
mint IFNAME -[no]log [detail]
mint IFNAME roaming {leader | enable}
mint IFNAME profile N [-freq X[,Y,N-M,,..] | auto] [-sid
X[,Y,..]] [-bitr X]
[-band {double | full | half | quarter}]
[-type {master|slave}] [-key XXX] [-nodeid N]
[{-minbitr XXX [-autobitr [+/-dB]] | -fixedbitr}]
[enable | disable | delete]