User manual

Chapter 2 - General Purpose Command Set Sflowagent (Sflow Agent)
Alvarion BreezeNET B130/B300 GigE 25 Operational User Manual
2.13 Sflowagent (Sflow Agent)
Sflow Agent is a realization of a standard STP protocol agent.
Syntax:
Available commands are:
sta[rt] Start Sflow agent
sto[p] Stop Sflow agent
wi[pe] Stop Sflow agent and clean all configuration
add[instance] 'name' Add instance (default 'ipstat')
del[instance] 'name' Delete instance (default 'ipstat')
stat 'name' Show statistics for instance (default 'ipstat')
cl[earstat] 'name' Clear statistics for instance (default
'ipstat')
Available options are:
-collector=IPaddress[:port] Set collector address
-agent=IPaddress Set agent address (default 0.0.0.0)
-maxpacket=size Set maximal datagram size (default 1500)
-interval=number Set statistics receive interval, in seconds
(default 5)
-datagrams=number Set datagrams per statistics interval
(default 100)
-rawheader={on|off} Sends original ipV4 headers (default off)
-debug={on|off} Puts debug output to log (default off)
-version -v Display Version
Description:
Sflow - protocol for monitoring computer networks. It is commonly used by
Internet Providers to capture traffic data in switched or routed networks.
Sflowagent command allows configuration of Sflow agent on the device.
 sflow sta[rt] - starts Sflow agent
 sflow sto[p] - stops Sflow agent