User manual

Chapter 4 - Layer 3 Command Set - IP Networking DHCP Server
Alvarion BreezeNET B130/B300 GigE 228 Operational User Manual
<SCOPE> (MSOFT) 192.168.177.20 - 192.168.177.50
<SUBNET> 192.168.15.55/255.255.255.0
<RESERVATION> for ID:01:00:05:90:02:1F:C8
<OPTION> Class_Id "Swissvoice"
[vlan0] DOWN
<SUBNET> 192.168.178.1/255.255.255.0
>VIRTUAL INTERFACES
[v.192.168.177.81] UP
<SUBNET> 192.168.188.1/255.255.255.0
OK
After that, we can create a scope of addresses from which a DHCP server can give
a lease to the clients to which a DRA has an access.
Example:
#1> dhcpd add scope VIRTUAL_TEST
v.192.168.177.81 192.168.188.20 192.168.188.50
[v.192.168.177.81] <192.168.188.1> (VIRTUAL_TEST):
192.168.188.20-192.168.188.50 Scope attached
OK
#1> dhcpd show interface v.192.168.177.81
>VIRTUAL INTERFACES
[v.192.168.177.81] UP
<SUBNET> 192.168.188.1/255.255.255.0
<SCOPE> (VIRTUAL_TEST)
192.168.188.20 - 192.168.188.50
OK
#1> dhcpd show scope virtual_test
>SCOPES:
(VIRTUAL_TEST) 192.168.188.20 - 192.168.188.50
[v.192.168.177.81] ATTACHED [v.192.168.177.81]
<192.168.188.1>/255.255.255.0
<FREE RANGE> 192.168.188.20 - 192.168.188.50 =31