User manual

Chapter 4 - Layer 3 Command Set - IP Networking ARDA
Alvarion BreezeNET B130/B300 GigE 135 Operational User Manual
4.6 ARDA
4.6.1 Getting Started
ARDA is a daemon that does interconnection between RIP and OSPF regarding
routing processes.
ARDA configuration is performed by "arda" command.
4.6.2 Command Language. Basic Principles
ARDA has its own command shell (CS). To enter the shell, execute the following
command:
#1> arda
ARDA>
Commands entered in CS are not case-sensitive and can be shortened until
ambiguity appears. To get a quick hint you can press "?" at any time:
ARDA>?
configure Configuration from vty interface
end End current mode and change to root mode
(CTRL+C).
exit Back to WANFleX command shell (CTRL+D).
help Print command list
show Show running system information
CS can work in different modes. Current mode is displayed along with command
prefix as "ARDA(mode)#". For example, if configure command is entered, CS
switches to "config" mode:
ARDA> configure
ARDA(config)#
One can set the necessary mode or execute commands without specially entering
into ARDA module. For example, if we consistently execute the following
commands:
#1> arda configure
#1> arda
ARDA(config)#