Specifications

Appendix E - Parameters Summary Parameters Summary
BreezeNET B 206 System Manual
E.1.7 Service Parameters
Parameter Unit Range Default Run-Time
User Filtering Option RB
 Disable
 IP Protocol Only
 User Defined Addresses Only
 PPPoE Protocol Only
Disable Yes
Set/Change Filter IP
Address Ranges
RB <start address> to <end address>
or,
<base address> mask <mask>
0.0.0.0 TO 0.0.0.0
(all 8 entries)
No
DHCP Unicast Override
Filter
RB
 Disable DHCP Unicast
 Enable DHCP Unicast
Disable DHCP
Unicast
Yes
MIR: Downlink RB RB-B10: 128 - 4992 (Kbps)
RB-B14: 128 - 6912 (Kbps)
RB-B28: 128 - 22016 (Kbps)
RB-B100: 128 - 107904 (Kbps)
RB-B10: 4992
RB-B14: 6912
RB-B28: 22016
RB-B100:107904
Yes
MIR: Uplink RB RB-B10: 128 - 4992 (Kbps)
RB-B14: 128 - 6912 (Kbps)
RB-B28: 128 - 22016 (Kbps)
RB-B100: 128 - 107904 (Kbps)
RB-B10: 4992
RB-B14: 6912
RB-B28: 22016
RB-B100: 107904
Yes
Maximum Burst Duration RB 0 - 2,000 (ms) 5 (ms) No
VLAN Priority Threshold BU, RB 0 - 7 7 No
ToS Prioritization Option BU, RB
 Disable
 Enable IP Precedence
(RFC791) Prioritization
 Enable DSCP (RFC2474)
Prioritization
Disable No
IP Precedence Threshold BU, RB 0 - 7 4 No
DSCP Threshold BU, RB 0 - 63 32 No