Specifications

Appendix E - Parameters Summary Parameters Summary
BreezeNET B 201 System Manual
* Not applicable if only one Sub Band is available for the applicable Country Code
** Applicable only if DFS is supported by the Sub Band
*** Configurable only in units without an integral antenna.
**** Partial (only after the unit re-enters radar scanning, for example after a frequency change, sub-band
change, etc.)
E.1.4 Network Management Parameters
RB Maximum
Modulation
2.4 GHz
and
BU/RB-B
10
1 to 8 5 No
BU Maximum
Modulation
2.4 GHz
and
BU/RB-B
10
1 to 8 8 No
Keep Link 2.4 GHz
and
BU-B10
 Disable KeepLink
 Enable KeepLink
Enabled No
Channel Scan Period 2.4 GHz
and
BU/RB-B
10
2 to 30 (seconds) 5 No
Automatic Scan Period 2.4 GHz
and
BU/RB-B
10
0 (disabled) or 10 - 10080 (minutes) 0 (disabled) No
Parameter Unit Range Default Run-Time
Access to Network
Management
BU, RB
 From Wireless Link Only
 From Ethernet Only
 From Both Ethernet and
Wireless Link
From Both Ethernet
and Wireless Link
No
Parameter Unit Range Default Run-Time