Specifications

Appendix E - Parameters Summary Parameters Summary
BreezeNET B 199 System Manual
Antenna Gain*** BU, RB Minimum: 0 (dBi)
Maximum: 50 or Regulation Max
EIRP+10 (the lower of the two
values).
"Don't Care" or
"Not Set Yet" or 21
(depending on unit
type and
regulations)
No
Spectrum Analysis
Channel Scan Period
BU, RB 2 - 30 seconds 5 seconds Yes
(Configured
per analysis)
Spectrum Analysis
Scan Cycles
BU, RB 1 - 100 cycles 2 cycles Yes
(Configured
per analysis)
Automatic Channel
Selection
BU
 Disable
 Enable
Disable Yes
(Configured
per analysis)
Lost Beacons
Watchdog Threshold
BU 100 - 1000, 0 means Not Used 218 Yes
Noise Immunity State
Control
BU, RB
 Automatic
 Manual
Automatic Yes
Noise Immunity Level BU, RB 0 - 4
Use only 0 or 4
0Yes
Spur Immunity Level BU, RB 0 - 7 0 Yes
OFDM Weak Signal BU, RB 0 (not active) or 1 (active) 0 Yes
Pulse Detection
Sensitivity
BU, RB
 Low
 High
Low Yes
Noise Floor Calculation
Mode
BU, RB
 Fully Automatic
 Forced
 Automatic with Minimum Value
Fully Automatic Yes
Noise Floor Forced
Value
BU, RB -107 to -55 (dBm) 10 MHz bandwidth:
-99
20 MHz bandwidth:
-96
40 MHz bandwidth:
-93
Yes
Parameter Unit Range Default Run-Time