Specifications

Chapter 4 - Operation Menus and Parameters
BreezeNET B 133 System Manual
4.2.6.2.18.1.3Minimum Desired Distance
This setting defines the minimum achievable distance that must be reached when
optimizing the throughput. Not applicable when the Optimize Distance for
Minimum Desired Performance optimization criterion is used.
The available range is from 500 to 54000 (meters).
The default is 1400 (meters).
4.2.6.2.18.1.4Channel Selection Optimization Criteria
This setting allows you to select the optimization mechanism that will be
employed:
 0 - Optimize Performance for Minimum Desired Distance: Ensures the best
throughput while preserving the Minimum Desired Distance
 1 - Optimize Distance for Minimum Desired Performance: Ensures the best
achievable distance while preserving the Minimum Desired Performance
The default is Optimize Distance for Minimum Desired Performance.
4.2.6.2.18.1.5Scanning Type
This setting defines the output of the analysis process performed by the
Interference Mitigation mechanism:
 0 - Clear Channel Selection + Automatic Noise Floor Selection: For
optimizing both the operating channel and noise floor level (AU only)
 1 - Automatic Noise Floor Selection: For optimizing only the noise floor level
 2 - Clear Channel Selection: For optimizing only the operating channel (AU
only)
 3 - Statistics Only: For performing only a spectrum analysis, without
modifying the operating channel or noise floor level
The default is Clear Channel Selection + Automatic Noise Floor Selection.
4.2.6.2.18.2 Advanced Settings
Use this menu to provide additional parameters that will refine the analysis
performed by the Interference Mitigation mechanism. The default values for
Advanced Settings have been selected to optimize the results while complying with
the typical hardware configuration and installation, therefore you may safely
ignore these parameters, leaving their default settings in place. However,