Specifications

Chapter 4 - Operation Menus and Parameters
BreezeNET B 117 System Manual
of the Transmit Power Parameter depends on several unit properties and
parameters:
 The Maximum Allowed Tx Power as defined for the applicable Sub Band.
 The Maximum EIRP as defined for the applicable Sub Band, together with the
value of the Antenna Gain. In certain countries the Maximum EIRP of some
equipment types cannot exceed a certain value. In these cases the Transmit
Power cannot exceed the value of (Maximum EIRP - Antenna Gain).
 Maximum Tx Power parameter (in RB only)
For information on how to view the Sub Bands supported by the unit and the
supported parameters' values and options, refer to Section 4.2.2.4.
The unit calculates the maximum allowed Transmit Power according to the unit
properties and parameters listed above, and displays the allowed range when a
Transmit Power parameter is selected.
For each modulation level, the unit will use as transmit power the minimum
between this parameter and the maximum Tx power allowed by the HW and the
Country Code for the specific modulation level.The default Transmit Power is the
highest allowed value.
4.2.6.2.8.1.2 Show Transmit Power Parameters
This option displays the Transmit Power parameter and the current transmit
power for the different modulation levels.
4.2.6.2.8.2 Maximum Transmit Power (RB only)
The Maximum Transmit Power submenu includes the following options:
 Maximum Tx Power
 Show Maximum Tx Power Parameters
4.2.6.2.8.2.1 Maximum Tx Power
The Maximum Tx Power parameter limits the maximum transmit power that can
be reached by the ATPC algorithm. It also sets the upper limits for the Transmit
Power parameters.
The minimum value for the Maximum Tx Power is -10 dBm. The maximum value
depends on several unit properties and parameters:
 The Maximum Allowed Tx Power as defined for the applicable Sub Band.