Specifications

Legal Rights
BreezeNET B xiv System Manual
environments. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
FCC Radiation Hazard Warning
To comply with FCC RF exposure requirement in section 1.1307, the antenna
used for this transmitter must be fixed-mounted on outdoor permanent
structures with a separation distance of at least 2 meter from al persons for
antennas with a gain up to 28 dBi.
Antenna Compliance Statement
This device has been designed to operate with the antennas listed in Table 1-2,
and having a maximum gain of 28 dBi. Antennas not included in this list or
having a gain greater than 28 dBi are strictly prohibited for use with this device.
The required antenna impedance is 50 Ohms.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the Equivalent Isotropically Radiated Power (EIRP)
is not more than that permitted for successful communication.
R&TTE Compliance Statement
This equipment complies with the appropriate essential requirements of Article 3
of the R&TTE Directive 1999/5/EC.
Safety Considerations
For the following safety considerations, "Instrument" means the BreezeNET B
system's components and their cables.
Caution
To avoid electrical shock, do not perform any servicing unless you are qualified to
do so.
Line Voltage
Before connecting this instrument to the power line, make sure that the voltage of
the power source matches the requirements of the instrument.
Radio
The instrument transmits radio energy during normal operation. To avoid possible
harmful exposure to this energy, do not stand or work for extended periods of time
in front of its antenna. The long-term characteristics or the possible physiological
effects of Radio Frequency Electromagnetic fields have not been yet fully
investigated.
Outdoor Unit and Antenna Installation and Grounding