Specifications

Chapter 4 - Operation Menus and Parameters
BreezeNET B 104 System Manual
channel reuse algorithm enables returning to the original channel under certain
conditions that indicates low radar activity on the channel.
4.2.6.2.4 Frequency Definition Submenu in BU
The Frequency Definition submenu in BU includes the following parameters:
4.2.6.2.4.1 Sub Band Select
This parameter is available only if the country code supports two or more Sub
Bands. For information on how to view the Sub Bands supported by the unit and
the supported parameters' values and options, refer to Section 4.2.2.4.
The range depends on the number of Sub Bands supported by the country code.
The default selection is Sub Band 1.
Table 4-7: Comparison between DFS implementations for various country codes on the RB
Action Parameter ETSI 5.4 GHz ETSI 5.8 GHz Universal FCC
When reverting
the unit to
factory default
settings
DFS Option According to
country code
definition
According to
country code
definition
false According to
country code
definition
When upgrading
from a previous
software version
DFS Option false According to
country code
definition
false Unchanged
When changing
the country code
DFS Option According to
country code
definition
According to
country code
definition
false
 BU - According
to country code
definition
 RB - false
Channel Check
Time
60 sec.
(600 sec. for
freq. between
5600 and 5650
MHz)
60 sec.
(600 sec. for
freq. between
5600 and 5650
MHz)
60 sec. 60 sec.
Channel
Avoidance
Period
30 min. 30 min. 30 min. 30 min.
Minimum
Pulses to
Detect
4444
Frequency
Subset
Definition
According to
country code
definition
According to
country code
definition
According to
corresponding
ETSI 5.4/5.8
ALL