Specifications

Chapter 4 - Operation Menus and Parameters
BreezeNET B 84 System Manual
 Total received concatenated frames: The total number of concatenated
frames received from the wireless media, including duplicate frames. There are
also separate counts for concatenated frames that include one frame (Single),
two frames (Double) or more than two frames (More). For more details refer to
Section 4.2.6.5.10.
 Bad fragments received: The number of fragments received from the wireless
media containing CRC errors.
 Duplicate frames discarded: The number of data frames discarded because
multiple copies were received. If an acknowledgement message is not received
by the originating unit, the same data frame can be received more than once.
Although duplicate frames are included in all counters that include data
frames, only the first copy is forwarded to the Ethernet port.
 Internally discarded MIR: The number of data frames received from the
Ethernet port that were discarded by the MIR mechanism to avoid exceeding
the maximum permitted information rate.
 TX retransmission %: The percentage of frames that were not transmitted
properly and had to be retransmitted.
 TX CRC %: The percentage of Cyclic Redundancy Check errors that occurred
over the air link.
4.2.5.2 Ping Test
The Ping Test submenu is used to control pinging from the unit and includes the
following options:
 Destination IP Address: The destination IP address of the device being
pinged. The default IP address is 192.0.0.1.
 Number of Pings to Send: The number of ping attempts per session. The
available range is from 0 to 9999. The default value is 1. Select 0 for
continuous pinging.
 Ping Frame Length: The ping packet size. The available range is from 60 to
1472 bytes. The default value is 64 bytes.