Instruction manual

Setting Basic Parameters
1-3
BreezeACCESS Version 4.3 System Manual
Figure 1-1: Main Menu – Administrator Access Rights (SU and AU)
The appearance of the Main Menu varies in accordance with the set
access level.
For users with Read Only access rights, only the Info Screens option
is displayed. Users with this access level cannot access the Unit
Control, Basic Configuration, Site Survey and Advanced
Configuration menus.
For users with Installer access rights, the first four menu items (Info
Screens, Unit Control, Basic Configuration and Site Survey) are
displayed. Users with this access level cannot access the Advanced
Configuration menu.
For users with Administrator access rights, the full Main Menu will
be displayed. These users can access all the menu items.
Accessing the Monitor Program
using Telnet
1. Connect a PC to the Ethernet port of the unit. See the table below to
determine the type of cable. Configure the PC’s IP parameters to enable
connectivity with the unit (the default IP Address is 10.0.0.1). Run the Telnet
application.
BreezeACCESS/AU-BS
Official Release Version – 4.0.40
Release Date: Thu Dec 20 20:21:36 2001
Main Menu
=====================
1 – Info Screens
2 – Unit Control
3 – Basic Configuration
4 – Site Survey
5 – Advanced Configuration
X – Exit
>>>
NOTE:
The Main Menu of the BS-GU (GPS and Alarms module) does not include the Basic
Configuration option.