Instruction manual

IF Based Equipment
1-17
BreezeACCESS Version 4.3 System Manual
The BS-AU
Figure 1-10: BS-AU Front Panel
Table 1-9: BS-AU LEDs
WARNING:
If two power supply modules are used in the same chassis for redundancy, both power
supplies must be of the same type. Do not use a mix of AC and DC power supply
modules in the same chassis.
Name Description Functionality
PWR Power supply
12 VDC
On – After successful power up, indicating that
12 VDC is supplied to the outdoor unit.
Off – Power off or DC/DC converter failure
(12 VDC not supplied to the outdoor unit)
WLNK Wireless link activity Blinking – Receiving packets from the
wireless media
Off – No reception of packets from the
wireless media
ALRM Alarm On – Loss of hopping synchronization (in
Slave mode)
MASTER Master unit On – The unit is configured as Master