Instruction manual

IF Based Equipment
1-3
BreezeACCESS Version 4.3 System Manual
BS-PS DC Power Supply (one or two per
chassis)
 BS-PS power supply module
 DC power cable
BS-PS-AC Power Supply (one or two per
chassis)
 BS-PS-AC power supply module
 AC power cable
GU-A-BS GPS and Alarms System
 BS-GU module
 GU-RA GPS antenna and receiver
 1” threaded mounting pole for the GU-RA GPS antenna
 Antenna Mounting kit
Standalone AU-E-NI Access Unit
 AU-RE with a connector to an external antenna (not included)
 Pole mounting kit for the outdoor unit
 AU-NI indoor unit
 Wall mounting kit for the AU-NI unit
 AU-PS power supply with a mains power cord
 Monitor cable
 Documentation CD
Other Items Required for
Installation
 IF cable* (available from Alvarion in different lengths)
 Grounding cable with an appropriate termination
 Antenna* and RF cable* according to specific installation conditions
for units with external separate antennas
 Ethernet cable to connect the equipment to the Ethernet outlet (see
Table 1-1‚ page 1-4
)
 Telephone cord for connecting a Subscriber Unit with voice support
to a telephone set (RJ 11 connector at the Subscriber Unit side)
 GPS cable (30, 60 or 120 meter – supplied separately according to
order)*
 SYNC cable* – for daisy-chaining GPS modules (if necessary)