Instruction manual

C-44
BreezeACCESS Version 4.3 System Manual
Manual Revision: 4.0
General Info MIB
Supported Traps
Note: * is used instead of the brzacc prefix
Trap Associated Parameters
*MinimumFlashDetectTimeOut
710.3.4.3.3.1
(*TimeOuts 1)
The minimum on-hook time for identifying it
as a Hook Flash.
Integer
0-2,000 (milliseconds)
*MaximumFlashDetectTimeOut
710.3.4.3.3.2
(*TimeOuts 2)
The maximum on-hook time for identifying
it as a Hook Flash.
Integer
0-2,000 (milliseconds)
*DisconnectTimeOut
710.3.4.3.3.3
(*TimeOuts 3)
The minimum time for decision on an on-
hook (disconnect) condition.
Integer
0-2,000 (milliseconds)
*InterDigitTimeOut
710.3.4.3.3.4
(*TimeOuts 4)
Applicable only for pulse dialing. The
minimum time between two consecutive
pulses to be considered as separating
between two digits.
Integer
0-2,000 (milliseconds)
*CalledPartyReleaseTimeOut
710.3.4.3.3.5
(*TimeOuts 5)
The minimum time for an on-hook signal on
the called party side to be considered as
call disconnect.
Integer
0-10,000 (milliseconds)
MIB Parameter
(Location in Parenthesis)
Description Values
*GenInfo 710.3.4.9
(breezecomPrvRev 9)
General Info MIB
brzHoppingStandardProtected Applicable to AU and SU in
BreezeACCESS II family. Read-only.
Indicates if the Hopping Standard (Band)
can be changed (if protected or not).
Integer
notProtected (1)
protected (2)
MIB Parameter
(Location in Parenthesis)
Description Values
*Traps
710.3.3.14
(brzAccessMib 14)
*TrapSUMacAddr
710.3.3.14.1
(*Traps 1)
Applicable to AU only. SU MAC address. MAC address
*TrapRssiQuality
710.3.3.14.2
(*Traps 2)
Applicable to SU only. RSSI level of the received signal. Integer
*TrapLastRssiQuality
710.3.3.14.3
(*Traps 3)
Applicable to SU only. RSSI level of the received signal
from the last AU with which the SU was associated.
Integer
*TrapText
710.3.3.14.4
(*Traps 4)
Textual string for future use. DisplayString
MIB Parameter
(Location in Parenthesis)
Description Values