Instruction manual

Appendix C
C-43
BreezeACCESS Version 4.3 System Manual
Telephony Signals
MIB Parameter
(Location in Parenthesis)
Description Values
*TelephonySignals
710.3.4.3
(brzPhonMib 3)
*TelephonyCountryStandard
710.3.4.3.1
(*TelephonySignals 1)
The country standard for call progress
tones, ringer and timeouts.
INTEGER
proprietary (1)
germany (2)
sweden (3)
france (4)
unitedKingdom (5)
belgium (6)
usa (7)
chile (8)
na (255)
*TonesTable
710.3.4.3.2
(*TelephonySignals 2)
A table of parameters of the tones. If the
*TelephonyCountryStandard is set to
proprietary, the tones parameters may be
configured (read/write). For all other
country standards, the values are read-
only. Not accessible.
*TonesEntry
710.3.4.3.2.1
(**TonesTable 1)
A table entry in the Tones Table. Not
accessible.
*TonesIdx
710.3.4.3.2.1.1
(*TonesEntry 1)
An index to the Tones Table indicating the
tone type. Read-only.
Integer
1-8
*ToneName
710.3.4.3.2.1.2
(*TonesEntry 2)
The name of the tone. Integer
Dial Tone(1)
Ring Back Tone (2)
Busy Tone (3)
Congestion Tone (4)
Call In Process Tone (5)
Ring Frequency (6)
Error Tone (7)
High Level Error Tone (8)
*Freq1
710.3.4.3.2.1.3
(*TonesEntry 3)
One of the two frequencies that can be
used for generating the tone. Serves as the
Ringer Frequency for Tone 6 (Ring
Frequency).
If set to 0 – this frequency is not used.
Integer
0-3000 (Hz)
If Ring Frequency (Tone 6), valid
values are 17, 20, 25, 50 (Hz).
*Freq2
710.3.4.3.2.1.4
(*TonesEntry 4)
The second frequency that can be used for
generating the tone.
Not Applicable for Ring Frequency (Tone 6)
If set to 0 – this frequency is not used.
Integer
0-3000 (Hz).
na (255)
*Level1
710.3.4.3.2.1.5
(*TonesEntry 5)
The level in dBm of the first frequency
(*Freq1).
Not Applicable for Ring Frequency (Tone 6)
Display String
-31 to 3 (dBm). ñ32 is for mute.
*Level2
710.3.4.3.2.1.6
(*TonesEntry 6)
The level in dBm of the second frequency
(*Freq2).
Not Applicable for Ring Frequency (Tone 6)
Display String
-31 to 3 (dBm). ñ32 is for mute.
*CadenceOn
710.3.4.3.2.1.7
(*TonesEntry 7)
the ringing time (on) in the tones/silence
sequence of the tone.
Integer
100–10,000 (milliseconds)
*CadenceOff
710.3.4.3.2.1.8
(*TonesEntry 8)
the silence time (off) in the tones/silence
sequence of the tone.
Integer
100–10,000 (milliseconds)
*Duration
710.3.4.3.2.1.9
(*TonesEntry 9)
the maximum duration of transmitting the
tone to the earphone. Tone generation will
cease upon hang-up (upon off-hook for
Tone 6 - Ring Frequency).
Integer
0-10,000 (seconds)
(0 means that the tone is not used).
*TimeOuts
710.3.4.3.3
(*TelephonySignals 3)
Time Out parameters. If the
*TelephonyCountryStandard is set to
proprietary, the Time Out parameters may
be configured (read/write). For all other
country standards, the values are read-
only.