Instruction manual

C-40
BreezeACCESS Version 4.3 System Manual
Manual Revision: 4.0
*InformTransferCap
710.3.4.1.14
(*DialingParams 14)
Defines the value of the information
transfer capability in the SETUP
message.
Integer
speech (0)
unrestricted (1)
restricted (2)
audio (3)
unrestrictedTones (4)
video (5)
na (255)
*DTMFRelay
710.3.4.1.15
(*DialingParams 15)
Disable/enable DTMF Relay.
0 ñ Disable. DTMF is transferred in-
band.
1 ñ Enable. In-band DTMF is filtered.
DTMF is relayed via H.245
session.In case of 'Fast Start' H.245
session will be forced upon DTMF
detection.
2 - Enable Proprietary. In-band
DTMF is filtered. In case of 'Fast
Start' DTMF is relayed via Q.931
session. Otherwise DTMF is relayed
via H.245 session.
Integer
disable (0)
enable (1)
enableProprietary (2)
na (255)
*DialingPrfxOption
710.3.4.1.16 (
(*DialingParams 16)
Defines the Dialing Prefix Option for
handling prefixes according to the
dialing plan supported by the unit.
disable (0): Insert Automatic Prefix (if
defined). Otherwise forward as
dialed.
enable (1): Insert Automatic Prefix (if
defined) only if first digit differs from
*InterRegionalPrfx. Otherwise
forward as dialed.
enableBlockInter-
RegionalPrfx (2):
Insert Automatic Prefix (if defined)
only if first digit differs from
*InterRegionalPrfx. Remove the first
digit if it equals *InterRegionalPrfx
and the second digit differs from
*InterNationalPrfx. Otherwise
forward as dialed.
Integer
disable (0)
enable (1)
enableBlockInter-
RegionalPrfx (2)
na (255)
*InterRegionalPrfx
710.3.4.1.17
(*DialingParams 17)
To define the Inter Regional prefix to
be handled according to the dialing
plan supported by the unit.
DisplayString (SIZE (0..1))
One phone keypad digit (0-9, A-D, *, #) or
X. X means no Inter Regional Prefix is
defined
*InterNationalPrfx
710.3.4.1.18
(*DialingParams 18)
To define the International prefix to
be handled according to the dialing
plan supported by the unit.
DisplayString (SIZE (0..1))
One phone keypad digit (0-9, A-D, *, #) or
X. X means no International Prefix is
defined.
*RegistrationTTL
710.3.4.1.19
(*DialingParams 19)
To define the registration Time To
Live. (timeToLive request in the RRQ
message to the Gatekeeper).
Integer
0 ñ 65535
*EndpointType
710.3.4.1.20
(*DialingParams 20)
To define the EndpointType
components in H.323 messages for
interoperability with other equipment
using H.323.
Integer
terminal (1)
gateway (2)
na (255)
*FaxRelay
710.3.4.1.21
(*DialingParams 21)
Disable/enable T.38 fax relay Integer
disable (0)
enable (1)
na (255)
*FaxRelayRedundancy
710.3.4.1.22
(*DialingParams 22)
Defines redundancy used for
transmitting IFP messages
Integer
0-5
na (255)
*BatteryPolarity
710.3.4.1.23
(*DialingParams 23)
To define the battery polarity for
supporting an external device, e.g.
for coins or tokens charging purpose.
This feature is only available in units
with voice card from Version D and
up.
Integer
forward (1)
reverse (2)
forwardToReverse (3)
reverseToForward (4)
na (255)
MIB Parameter
(Location in Parenthesis)
Description Values