Instruction manual

Appendix C
C-33
BreezeACCESS Version 4.3 System Manual
Special Operations Parameters
Note: Additional Special Operations parameters are reserved for factory use only.
*MinimumAverageNumberOfSUs
710.3.3. 8.7.7.3
(*RespondingSUs 3)
Applicable to IF-based AU only.
The minimum average number of
SUs required for association tests
Integer
1 – 254 (SUs)
*AUAlarmsStatus
710.3.3. 8.7.8
(*AUAlarms 8)
Applicable to IF-based AU only.
Alarms Status parameters.
*AlarmsStatusTable
710.3.3. 8.7.8.1
(*AUAlarmsStatus 1)
Applicable to IF-based AU only. Not
accessible. AU Alarms Status
Table containing the current status
of each of the alarms.
*AlarmsStatusEntry
710.3.3. 8.7.8.1.1
(*AlarmsStatusTable 1)
Applicable to IF-based AU only. Not
accessible. An entry in the AU
Alarms Status Table.
*AlarmType
710.3.3. 8.7.8.1.1.1
(*AlarmsStatusEntry 1)
Applicable to IF-based AU only.
Read only. The alarm type of an
entry in the AU Alarms Status
Table. Serves also as the index of
the entry.
Integer
noAssociations (1)
allAssociationsLost (2)
txPowerLevelDecrease (3)
rxSignalStrengthDecrease
(4)
highRetransmissionsRate (5)
highDroppedFramesRate (6)
highCRCErrorRate (7)
highDuplicateFramesRate (8)
*AlarmStatus
710.3.3. 8.7.8.1.1.2
(*AlarmsStatusEntry 2)
Applicable to IF-based AU only.
Read only. The status of the alarm
of an entry in the AU Alarms Status
Table. Serves also as the index of
the entry.
Integer
off (0)
minor (1)
major (2)
critical (3)
*ClearAllAlarms
710.3.3. 8.7.8.2
(*AUAlarmsStatus 2)
Applicable to IF-based AU only.
Read-write. Perform set with value
'clearAllalarms' in order to clear all
the alarms of the AU Alarms
feature. Setting any value other
than 'clearAllalarms' has no effect
Integer
cancelRequest (0)
clearAllAlarms (1)
MIB Parameter
(Location in
Parenthesis)
Description Values/Range
*SpecialOp
710.3.3. 9
(brzAccessMib 9)
*RadioBand
710.3.3. 9.1
(*SpecialOp 3)
Applicable to AU and SU. Read-only.
Identifies the product family/band:
DisplayString (SIZE(15))
(2.4 (BreezeACCESS II), MMDS, 2.6a, 2.6b, 3.3a,
3.5a, 3.5a1, 3.5b, 3.5ab, 3.5e, 3.6b, 3.8, 5.2, 5.7(SD),
3.5Aw, 3.5Bw, 3.5Cw)
MIB Parameter
(Location in Parenthesis)
Description Values/Range