Instruction manual

Appendix C
C-25
BreezeACCESS Version 4.3 System Manual
*TotalRxFramesFromWireless
710.3.3. 8.2.3.2
(*WlanCounters 2)
Applicable to SU and AU.
Read-only. The total number of
frames that were received from the
wireless media. The count includes
data and control and management
frames, including beacons received
from the AU. The count does not
include frames that were discarded
internally, bad frames and duplicate
frames.
Counter
*TotalRetransmittedFragments
710.3.3. 8.2.3.3
(*WlanCounters 3)
For future use Counter
*WlanFramesDropped
710.3.3. 8.2.3.4
(*WlanCounters 4)
Applicable to SU and AU.
Read-only. The number of dropped
frames. The frames that were
retransmitted to the extent of the
maximum allowed number of
retransmissions without being
acknowledged.
Counter
*TransmittedFramesToWirelessDat
a
710.3.3. 8.2.3.5
(*WlanCounters 5)
Applicable to SU and AU only when
the ACSE Option is enabled.
Read-only. The number of data
frames transmitted to the wireless
media. The count includes one
count for each data frame that was
transmitted successfully (excluding
retransmissions).
Counter
*TransmittedFramesToWirelessVoi
ce
710.3.3. 8.2.3.6
(*WlanCounters 6)
Applicable to SU and AU only when
the ACSE Option is enabled.
Read-only. The number of voice
frames, including fax and redundant
T.38 frames, transmitted to the
wireless media. The count includes
one count for each frame that was
transmitted successfully (excluding
retransmissions).
Counter
*TransmittedFramesToWirelessBea
con
710.3.3. 8.2.3.7
(*WlanCounters 7)
Applicable to AU only when the
ACSE Option is enabled.
Read-only. The number of beacons
transmitted to the wireless media.
The count includes one count for
each beacon that was transmitted
successfully (excluding
retransmission attempts).
Counter
*TotalSubmittedFrames
710.3.3. 8.2.3.8
(*WlanCounters 8)
Applicable to SU and AU.
Read-only. The total number of data
and RTP frames submitted to the
bridge for transmission to the
wireless media. The count does not
include control and management
frames, and retransmissions.
Counter
*SubmittedFramesHigh
710.3.3. 8.2.3.9
(*WlanCounters 9)
Applicable to SU and AU.
Read-only. Counts the number of
frames submitted to the bridge via
the High queue for transmission to
the wireless media. When the
ACSE Option is enabled, it counts
data and RTP frames. When the
ACSE Option is disabled, it counts
only data frames.
Counter
*SubmittedFramesMid
710.3.3. 8.2.3.10
(*WlanCounters 10)
Applicable to SU and AU.
Read-only. Counts the number of
frames submitted to the bridge via
the Mid queue for transmission to
the wireless media. When the
ACSE Option is enabled, it counts
data and RTP frames. When the
ACSE Option is disabled, it counts
only data frames.
Counter
MIB Parameter
(Location in Parenthesis)
Description Values/Range