Instruction manual

C-24
BreezeACCESS Version 4.3 System Manual
Manual Revision: 4.0
Site Survey Parameters
MIB Parameter
(Location in Parenthesis)
Description Values/Range
*SiteSurvey
710.3.3. 8
(brzAccessMib 8)
PerHopStatisticsTable
710.3.3. 8.1
(*SiteSurvey 1)
Applicable to SU and AU. Statistics
accumulated since last reset and
average RSSI per frequency for all
hopping frequencies in the
(sequence). Not Accessible.
hopSeqEntry
710.3.3. 8.1.1
(perHopStatisticsTable 1)
Applicable to SU and AU. A Per
Hop Statistics Table entry. Not
accessible.
wPperHopStatisticsTable
710.3.3. 8.1.1.1
(hopSeqEntry 1)
Applicable to SU and AU. Read-
only. The channel number
according to the hopping sequence.
Integer
hopTracerRx
710.3.3. 8.1.1.2
(hopSeqEntry 2)
Applicable to SU and AU. Read-
only. The accumulated number of
frames received since last reset at
the applicable frequency.
Integer
hopTracerTx
710.3.3. 8.1.1.3
(hopSeqEntry 3)
Applicable to SU and AU. Read-
only. The accumulated number of
frames transmitted since last reset
at the applicable frequency.
Integer
hopTracerRetries
710.3.3. 8.1.1.4
(hopSeqEntry 4)
Applicable to SU and AU. Read-
only. The accumulated number of
frames retransmitted since last
reset at the applicable frequency.
Integer
hopTracerRSSI
710.3.3. 8.1.1.5
(hopSeqEntry 5)
Applicable to SU and AU. Read-
only. The average RSSI of frames
received at the applicable
frequency.
DisplayString (SIZE(20))
* hopTracerFreq
710.3.3. 8.1.1.6
(hopSeqEntry 6)
Applicable to SU and AU. Read-
only. The frequency in MHz of the
entry.
DisplayString (SIZE(9))
*TrafficStatistics
710.3.3. 8.2
(*SiteSurvey 2)
Applicable to SU and AU. Traffic
Statistics parameters.
*ResetTrafficCounters
710.3.3. 8.2.1
(*TrafficStatistics 1)
Applicable to SU and AU. Resets
the Ethernet Counters
(*EthCounters) and the Wireless
Link Counters (*WlanCounters).
Integer
noReset (0)
reset (1)
*EthCounters
710.3.3. 8.2.2
(*TrafficStatistics 2)
Applicable to SU and AU. Ethernet
counters.
*TotalRxFramesViaEthernet
710.3.3. 8.2.2.1
(*EthCounters 1)
Applicable to SU and AU.
Read-only. Total number of frames
received via the Ethernet port.
Counter
*TxWirelessToEthernet
710.3.3. 8.2.2.2
(*EthCounters 2)
Applicable to SU and AU.
Read-only. Total number of frames
transmitted to the Ethernet port.
Counter
*WlanCounters
710.3.3. 8.2.3
(*TrafficStatistics 3)
Applicable to SU and AU. Wireless
link counters.
*TotalTxFramesToWireless
710.3.3. 8.2.3.1
(*WlanCounters 1)
Applicable to SU and AU.
Read-only. The number of frames
transmitted to the wireless media.
The count includes one count for
each data or RTP frame that was
transmitted successfully (excluding
retransmissions), and also the
number of transmitted control and
management frames.
Counter