Instruction manual

C-20
BreezeACCESS Version 4.3 System Manual
Manual Revision: 4.0
*ACSEOption
710.3.3. 6.27.1
(*ACSEParameters 1)
Applicable for AU, SU and GU.
Read-only in the SU. Disable/enable
the ACSE Voice Scheduler
mechanism.
Integer
disable (0)
enable (1)
*ACSEDwellTime
710.3.3. 6.27.2
(*ACSEParameters 2)
Applicable for AU, SU and GU.
Read-only. The dwell time when the
*ACSEOption is enabled. Currently
set to 60 milliseconds.
Integer
60 (mseconds)
na (255)
*ACSEMaximumVoiceSessions
710.3.3. 6.27.3
(*ACSEParameters 3)
Applicable to AU only.
The maximum number of
simultaneous ACSE voice sessions
permitted to guarantee minimum
quality. Applicable only when the
*ACSEOption is enabled.
Integer
0-15
na (255)
*ACSENumberOfDataRetransmissions
710.3.3. 6.27.4
(*ACSEParameters 4)
Applicable to SU and AU. Maximum
times to retransmit an
unacknowledged data packet.
Applicable only when the
*ACSEOption is enabled.
Integer
0-100
*ACSENumberOfVoiceRetransmission
s
710.3.3. 6.27.5
(*ACSEParameters 5)
Applicable to SU with voice and AU.
Maximum times to retransmit an
unacknowledged voice packet.
Applicable only when the
*ACSEOption is enabled.
Integer
0-100
*OperatorESSIDOption
710.3.3. 6.28
(*AirInterface 28)
Applicable for AU only. The
Enabling/disabling the use of the
Operator ESSID.
Integer
disable (0)
enable (1)
na (255)
*MaxNumOfAssociations
710.3.3. 6.29
(*AirInterface 29)
Sets the upper limit for the number of
Subscriber Units that can be
associated with the AU.
Integer
0-512
*CurrentTransmitPowerControl
710.3.3. 6.30
(*AirInterface 30)
Applicable for both AU and SU IF
based SU units (SU-A/E) and SU-R-
3.5ab units. Displays the current
value that is used to control the
transmit power level of the unit. If
brzaccAtpcOption is disabled, it
equals the value of
brzaccTransmitPowerControl
(SU-A/E units) or
brzaccCurrentTxPwrLvl (SU-R-3.5ab
units).
If brzaccAtpcOption is enabled, its'
value may change depending on the
ATPC algorithm.
Integer
SU-A/E in BreezeACCESS II, XL and MMDS:
0-15,
SU-A/E in BreezeACCESS V: 0-7
SU-R-3.5ab:0-2
* SiteProprietary
710.3.3. 6.31
(*AirInterface 31)
Site Proprietary parameters.
Applicable only to BreezeACCESS II
SU and AU configured to work in the
special Site Proprietary hopping
standard.
*SPNumOfFreqs
710.3.3. 6.31.1
(* SiteProprietary 1)
Number of frequencies in the
proprietary hopping sets parameters.
*FirstSetNumOfFreqs
710.3.3. 6.31.1.1
(*SPNumOfFreqs 1)
Read-Only. Number of frequencies
in the first set.
Integer
na (255)
*SecondSetNumOfFreqs
710.3.3. 6.31.1.2
(*SPNumOfFreqs 2)
Read-Only. Number of frequencies
in the second set.
Integer
na (255)
*ThirdSetNumOfFreqs
710.3.3. 6.31.1.3
(*SPNumOfFreqs 3)
Read-Only. Number of frequencies
in the third set.
Integer
na (255)
MIB Parameter
(Location in Parenthesis)
Description Values/Range