Instruction manual

C-16
BreezeACCESS Version 4.3 System Manual
Manual Revision: 4.0
*ChannelSpacing
710.3.3. 6.15.5
(*FlexSubBandDef 5)
Applicable to SU and AU in
BreezeACCESS XL family only.
Applicable only in Flexible Hopping
Definition mode. Defines the
minimum distances between two
frequencies. (Not available in some
products that only support a 2MHz
Channel Spacing)
Integer
space1_75MHz (0)
space1MHz (1)
space2MHz (2)
na (255)
*AddFlexHopChannels
710.3.3. 6.15.7
(*FlexSubBandDef 7)
Applicable to SU and AU in
BreezeACCESS MMDS family only.
Adds MMDS channels to the list of
channels to be used.
DisplayString (SIZE(244))
Up to 244 printable ASCII characters in one of
the following formats:
1. A1
2. B2,C3,G4 (no spaces)
*DelFlexHopChannels
710.3.3. 6.15.8
(*FlexSubBandDef 8)
Applicable to SU and AU in
BreezeACCESS MMDS family only.
Deletes MMDS channels from the list
of channels to be used.
DisplayString (SIZE(244))
Up to 244 printable ASCII characters in one of
the following formats:
1. A1
2. B2,C3,G4 (no spaces)
*ScramblingDefinition
710.3.3. 6.15.9
(*FlexSubBandDef 9)
Applicable to SU and AU.
Scrambling parameters.
*ScramblingMode
710.3.3. 6.15.9.1
(*ScramblingDefinition 1)
Applicable to SU and AU. The
method of scrambling the
frequencies defined in the Flexible
Hopping Definition process for
generating the basic hopping
sequence.
Standard mode - this mode
automatically scrambles the
frequencies according to the
algorithm used in SW version 3.x
and lower. It is suitable for up to 6
frequencies.
Enhanced mode - this mode
automatically scrambles the
frequencies according to a new
algorithm.
Manual mode - The user defines the
hopping sequence using the
frequencies indexes.
Integer
standardMode (1)
manualMode (2)
enhancedMode(3)
*ManualSequenceDefinition
710.3.3. 6.15.9.2
(*ScramblingDefinition 2)
Applicable to SU and AU.
Manual scrambling definition.
Configuring the sequence using the
frequencies indexes.
Display String.
Up to 244 printable ASCII characters.
Allowed Range of Indexes: '1' to 'Number of
Channels'.
Sequence Length must be equal to 'Number of
Channels'.
Use a comma to separate between entries.
*EraseManualSequence
710.3.3. 6.15.9.3
(*ScramblingDefinition 3)
Applicable to SU and AU. Erase the
manually configured sequence.
Integer
cancelOperation (0)
eraseAll (1)
*SpanningFactor
710.3.3. 6.15.9.4
(*ScramblingDefinition 4)
Applicable to AU only. The Spanning
Factor to be used by the Enhanced
Scrambling mechanism. The
Spanning Factor should be chosen
so that the GCD (Greater Common
Divisor) of the Spanning Factor and
the Number of Frequencies would be
1 (e.g. for 8 frequencies possible
values for the Spanning Factor are 1,
3, 5 and 7). The SU learns the value
of the Spanning Factor from the AU.
Integer
From 1 to ‘Number of Frequencies’, provided it
meets the GCD requirement.
*ScrambledSeqTable
710.3.3. 6.15.9.5
(*ScramblingDefinition 5)
Applicable to SU and AU only. The
scrambled sequence to be
supported after next reset. Not
accessible.
*ScrambledSeqEntry
710.3.3. 6.15. 9.5.1
(*ScrambledSeqTable 1)
Applicable to SU and AU only. A
Scrambled Sequence Table entry.
Not accessible.
MIB Parameter
(Location in Parenthesis)
Description Values/Range