Instruction manual

Appendix C
C-15
BreezeACCESS Version 4.3 System Manual
*AddSubBand
710.3.3. 6.15.1
(*FlexSubBandDef 1)
Applicable to SU and AU only.
In BreezeACCESS II, V and MMDS
families it adds sub-bands (f1-f2) or
discrete frequencies to the list of
sub-bands/frequencies to be used
for generating the basic Hopping
Sequence after the next reset.
In BreezeACCESS XL it defines a
new set of sub-bands/frequencies to
be used for generating the basic
Hopping Sequence after the next
reset.
DisplayString (SIZE(244))
Up to 244 printable ASCII characters.
Use either MHZ resolution ìaaaaî or kHz
resolution ìaaaa.bbbî.
Use a hyphen between two entries defining a
sub-band. Use a comma between sub-bands
and/or discrete frequency entries. Do not use
spaces.
*DelSubBand
710.3.3. 6.15.2
(*FlexSubBandDef 2)
Applicable to SU and AU in
BreezeACCESS II, V and MMDS
families only.
Deletes sub-bands (f1-f2) or discrete
frequencies from the list of sub-
bands/frequencies to be used for
generating the basic Hopping
Sequence after the next reset.
DisplayString (SIZE(244))
Up to 244 printable ASCII characters.
Use either MHZ resolution ìaaaaî or kHz
resolution ìaaaa.bbbî.
Use a hyphen between two entries defining a
sub-band. Use a comma between sub-bands
and/or discrete frequency entries. Do not use
spaces.
*ErazeAllSubBands
710.3.3. 6.15.3
(*FlexSubBandDef 3)
Applicable to SU and AU in
BreezeACCESS II, V and MMDS
families only.
Deletes all entries from the table of
the frequencies to be used.
Integer
eraseAll (0)
noOperation (1)
na (255)
*SubBandTable
710.3.3. 6.15.4
(*FlexSubBandDef 4)
Applicable to SU and AU only. The
list of sub-bands to be supported
after next reset. Not accessible.
*SubBandEntry
710.3.3. 6.15.4.1
(*SubBandTable 1)
Applicable to SU and AU only. A
Sub-Band Table entry. Not
accessible.
*SubBand
710.3.3. 6.15.4.1.1
(*SubBandEntry 1)
Applicable only to SW version 2.6.
Applicable to SU and AU only. Read-
only. A Sub-Band in the Sub-Bands
Table.
Integer
*SubBandsTableIdx
710.3.3. 6.15.4.1.2
(*SubBandEntry 2)
Applicable to SU and AU only. Read-
only. A Sub-Band Table entry index.
Integer
*SubBandExp
710.3.3. 6.15.4.1.3
(*SubBandEntry 3)
Applicable to SU and AU only. Read-
only. A Sub-Band in the Sub-Bands
Table.
DisplayString (SIZE(10))
*CurrentHoppingSeqTable
710.3.3. 6.15.5
(*FlexSubBandDef 5)
Applicable to SU and AU only. The
list of hopping frequencies in the
Current Hopping Sequence. Not
accessible.
*CurrentHoppingSeqEntry
710.3.3. 6.15.5.1
(*CurrentHoppingSeqTable 1)
Applicable to SU and AU only. A
Current Hopping Sequence Table
entry. Not accessible.
*HopSeqSubBand
710.3.3. 6.15.5.1.1
(*CurrentHoppingSeqEntry 1)
Applicable only to SW version 2.6.
Applicable to SU and AU only. Read-
only. A frequency in the Current
Hopping Sequence Table.
Integer
*CurrHopSeqTableIdx
710.3.3. 6.15.5.1.2
(*CurrentHoppingSeqEntry 2)
Applicable to SU and AU only. Read-
only. A Current Hopping Sequence
Table index.
Integer
*CurrSubBandExp
710.3.3. 6.15.5.1.3
*CurrentHoppingSeqEntry 3)
Applicable to SU and AU only. Read-
only. A frequency in the Current
Hopping Sequence Table.
DisplayString (SIZE(10))
MIB Parameter
(Location in Parenthesis)
Description Values/Range