Instruction manual

C-14
BreezeACCESS Version 4.3 System Manual
Manual Revision: 4.0
*HoppingBands (continued) BreezeACCESS 3.5b, 3.5ab:
frq3_5aGHzHoppingSequence10MHz (15)
frq3_5aGHzHoppingSequence12MHz (16)
frq3_5aGHzHoppingSequence14MHz (17)
frq3_5aGHzHoppingSequence24MHz (18)
frq3_5aGHzHoppingSequence28MHz (19)
frq3_5aGHzHoppingSequence36MHz (20)
frq3_5aGHzHoppingSequence42MHz (21)
frq3_5bGHzHoppingSequence50MHz (32)
frqFlexibleHopping (37)
frqSingleChannel3_5GHz (40)
frq3_5aGHzHoppingSequence24MhzPropriet
ary(69)
BreezeACCESS 3.8:
frq3_8GHzBand1 (0)
frq3_8GHzSelectable (1)
frq3_8GHzApprovalSpectrumMask (2)
frqFlexibleHopping (37)
frqSingleChannel3_8GHz (42)
BreezeACCESS 5.2: (read only)
frqFlexibleHopping (37)
BreezeACCESS 5.7
frg5_7GHzISMUsFCC(74)
frg5_7GHzInternational(75)
frg5_7GHzFlexibleHopping(37)
*MaxDataRate
710.3.3. 6.10
(*AirInterface 10)
Applicable to SU and AU. The
maximum transmission data rate.
Integer
max1Mbps (1)
max2Mbps (2)
max3Mbps (3)
na (255)
*TransmitPowerControl
710.3.3. 6.11
(*AirInterface 11)
Applicable to IF based units only.
Not applicable to AlvariBase,
AU-BS-WA Enables reducing the
transmit power level.
The maximum available value is for
maximum power. A lower value
reduces the transmitted power. The
resulting transmit power level
depends on the unit type (band) and
on the attenuation of the IF cable. In
SU, If ATPC is enabled the algorithm
uses it as the initial power level
.
Integer
BreezeACCESS II, XL and MMDS: 0-15
BreezeACCESS V: 0-7
na (255)
*RxAttenuationControl
710.3.3. 6.12
(*AirInterface 12)
Applicable to IF-based SU (SU-A/E)
only.
Enables to set the attenuation in the
receive path to 0, 10 or 25dB. The
effect of inserting such attenuation in
the receive circuit is equivalent to
reducing the level of the received
signal (including both signal and
noise) by 2dB when selecting 10dB
attenuation and 12dB when selecting
25dB attenuation.
Integer
low0dB (0)
med10dB (1)
high25dB (2)
na (255)
*MaximumVoiceSessions
710.3.3. 6.14
(*AirInterface 14)
Applicable to AU only.
The maximum number of
simultaneous voice sessions
permitted to guarantee minimum
quality.
Integer
0-50
na (255)
*FlexSubBandDef
710.3.3. 6.15
(*AirInterface 15)
Applicable to SU and AU only.
Flexible Hopping Definition
parameters.
MIB Parameter
(Location in Parenthesis)
Description Values/Range