Instruction manual

C-8
BreezeACCESS Version 4.3 System Manual
Manual Revision: 4.0
*DeleteAllTrapAddrs
710.3.3.4.9
(*NwMngParameters 9)
Applicable to AU, SU and GU. Deletes all
entries from the Management Trap Table.
Integer
0=off
1=on
2=off
255=na
*PerTrapControl
710.3.3.4.10
(*NwMngParameters 10)
Applicable to AU, SU and GU. Per Trap
Control parameters.
*SendSUAssociatedAUTrap
710.3.3.4.10.1
(*PerTrapControl 1)
Applicable to AU only. Enables\Disables
the sending of
brzaccSUassociatedAUTRAP.
Integer
disable (0)
enable (1)
*SendAUDissassociatedTrap
710.3.3.4.10.2
(*PerTrapControl 2)
Applicable to AU only. Enables\Disables
the sending of
brzaccAUdisassociatedTRAP.
Integer
disable (0)
enable (1)
*SendAUAgingTrap
710.3.3.4.10.3
(*PerTrapControl 3)
Applicable to AU only. Enables\Disables
the sending of brzaccAUagingTRAP.
Integer
disable (0)
enable (1)
*SendAUWirelessQualityTrap
710.3.3.4.10.4
(*PerTrapControl 4)
Applicable to AU only. Enables\Disables
the sending of
brzaccAUwirelessQualityTRAP.
Integer
disable (0)
enable (1)
*SendSUAssociatedTrap
710.3.3.4.10.5
(*PerTrapControl 5)
Applicable to SU only. Enables\Disables
the sending of brzaccSUassociatedTRAP.
Integer
disable (0)
enable (1)
*SendSUWirelessQualityTrap
710.3.3.4.10.6
(*PerTrapControl 6)
Applicable to SU only. Enables\Disables
the sending of
brzaccSUwirelessQualityTRAP.
Integer
disable (0)
enable (1)
*SendParameterChangedTrap
710.3.3.4.10.7
(*PerTrapControl 7)
Applicable to SU and AU.
Enables\Disables the sending of
brzaccParameterChangedTRAP.
Integer
disable (0)
enable (1)
*SendGPSAlarmInTrap
710.3.3.4.10.8
(*PerTrapControl 8)
Applicable to GU only. Enables\Disables
the sending of brzaccGpsAlarmInTRAP.
Integer
disable (0)
enable (1)
*SendGPSAlarmOutTrap
710.3.3.4.10.9
(*PerTrapControl 9)
Applicable to GU only. Enables\Disables
the sending of brzaccGpsAlarmOutTRAP.
Integer
disable (0)
enable (1)
*SendGPSUTCstatusTrap
710.3.3.4.10.10
(*PerTrapControl 10)
Applicable to GU only. Enables\Disables
the sending of
brzaccGpsUTCstatusTRAP.
Integer
disable (0)
enable (1)
*SendPowerUpFromResetTrap
710.3.3.4.10.11
(*PerTrapControl 11)
Applicable to AU, SU and GU.
Enables\Disables the sending of
brzaccPowerUpFromResetTRAP.
Integer
disable (0)
enable (1)
*SendMonitorStatusTrap
710.3.3.4.10.12
(*PerTrapControl 12)
Applicable to AU, SU and GU.
Enables\Disables the sending of
brzaccMonitorStatusTRAP.
Integer
disable (0)
enable (1)
*SendColdOrWarmStartTrap
710.3.3.4.10.13
(*PerTrapControl 13)
Applicable to AU, SU and GU.
Enables\Disables the sending of Generic
Start (Cold\Warm) Trap.
Integer
disable (0)
enable (1)
*SendAULossOfSyncTrap
710.3.3.4.10.14
(*PerTrapControl 14)
Applicable to BS-AU in slave mode only.
Enables\Disables the sending of
brzaccAULossOfSyncTRAP.
Integer
disable (0)
enable (1)
*SendAUAlarmsTraps
710.3.3.4.10.15
(*PerTrapControl 15)
Applicable to IF-based AU.
Enables\Disables the sending of all AU
Alarms traps.
Integer
disable (0)
enable (1)
MIB Parameter
(Location in Parenthesis)
Description Values/Range