Instruction manual

Appendix C
C-5
BreezeACCESS Version 4.3 System Manual
RADIUS Authentication Parameters
User Filtering Parameters
MIB Parameter
(Location in Parenthesis)
Description Values/Range
*RadiusAuthParameters
710.3.3. 21
(brzAccessMib 21)
Applicable to SU only. RADIUS Authentication
parameters.
*RadiusAuthOption
710.3.3. 21.1
(*RadiusAuthParameters 1)
Applicable to SU only. Enables or disables the
RADIUS Authentication support feature.
Integer
disable (0)
enable (1)
na (255)
* RadiusServerAuthIpAddress
710.3.3. 21.2
(*RadiusAuthParameters 2)
Applicable to SU only. IP Address of the authentication
RADIUS server.
IP address
*RadiusServerAuthPort
710.3.3. 21.3
(*RadiusAuthParameters 3)
Applicable to SU only. The authentication port of the
RADIUS server.
Integer
1000 – 65535
na (255)
*RadiusAuthenticationStatus
710.3.3. 21.3
(*RadiusAuthParameters 3)
Applicable to SU only. A read-only status of the
authentication process.
Integer
idle (0)
sendingRequest (1)
waitForResponse(2)
sendingChallenge(3)
authenticated (4)
rejected (5)
MIB Parameter
(Location in
Parenthesis)
Description Values/Range
*UserFilterParams
710.3.3. 2
(brzAccessMib 2)
Applicable to SU only. User Filtering parameters.
*UserFilterOption
710.3.3.2.1
(*UserFilterParams 1)
Applicable to SU only. Defines user-filtering options.
disable: No filtering.
iPOnly: Only IP protocol frames pass.
userDefinedAddrOnly: Only IP messages to/from user
defined IP addresses pass.
pPPoE Only: Only PPPoE frames pass.
Integer
disable (0)
iPOnly (1)
userDefinedAddrOnly(2)
pPPoEOnly (3)
na (255)
*IpFilterTable
710.3.3.2.2
(*UserFilterParams 2)
Applicable to SU only. An IP Filter Table of up to 8 user
defined addresses, or address groups, to be used if the
selected User Filtering option is userDefinedAddrOnly.
Not accessible.
*IpFilterEntry
710.3.3.2.2.1
(*IpFilterTable 1)
Applicable to SU only. An IP Filter Table entry. Not
accessible.
*IpID
710.3.3.2.2.1.1
(*IpFilterEntry 1)
Applicable to SU only. An IP address of an IP Filter Table
entry.
IP Address
*MaskID
710.3.3.2.2.1.2
(*IpFilterEntry 2)
Applicable to SU only. An IP Mask of an IP Filter Table
entry.
Either a mask or a range, but not both can be used to
define an address group.
IP Address
*IpFilterRange
710.3.3.2.2.1.3
(*IpFilterEntry 3)
Applicable to SU only. An addresses range for the IP
Filter Table entry. The first address in the range is the IP
address (*iPID).
Either a mask or a range, but not both can be used to
define an address group.
Integer
0 - 255
*IpFilterIdx
710.3.3.2.2.1.4
(*IpFilterEntry 4)
Applicable to SU only. Read-only. A table index for the IP
Filter Table entry.
Integer
1-8