Instruction manual

Appendix C
C-3
BreezeACCESS Version 4.3 System Manual
brzAccessMIB
Path:
breezecom OBJECT IDENTIFIER =1.3.6.1.4.1.710
{(iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) breezecom(710)}
breezecomPrvRev OBJECT IDENTIFIER = 1.3.6.1.4.1.710.3
{breezecom 3}
brzAccessMib OBJECT IDENTIFIER = 1.3.6.1.4.1.710.3.3
{breezecomPrvRev 3}
Note: * is used instead of the brzacc prefix
Service Parameters
breezecomAU_I breezecomBreezeACCESS_ACCESS 21
(710.10.2.1.21)
AU-I
breezecomSU_BS breezecomBreezeACCESS_ACCESS 22
(710.10.2.1.22)
SU-BS
breezecomAU_BS_WA breezecomBreezeACCESS_ACCESS 23
(710.10.2.1.23)
AU-BS-WA
breezecomGU_BS breezecomBreezeACCESS_GENERAL 1
(710.10.2.2.1)
GU-BS
MIB Parameter
(Location in Parenthesis)
Description Values/Range
*ServiceParameters
710.3.3.1
(
brzAccessMib 1)
MIR/CIR Parameters.
*MirCirOption
710.3.3.1.1
(*ServiceParameters 1)
Applicable to SU and AU only. The setting in the
AU enables/disables the MIR/CIR support
feature for all SUs served by the AU, regardless
of the setting in the SU.
The option exists in the SU only for compatibility
with AUs running SW versions 3.X and lower, in
which case the MIR/CIR support feature is
controlled at the SU.
Integer
disable (0)
enable (1)
na (255)
*MirAUtoSU
710.3.3.1.2
(*ServiceParameters 2)
Applicable to SU only. Sets the Maximum
Information Rate (MIR) from AU to SU.
Integer
32–2200 (Kbps)
Must be higher than *CirAUtoSU
*MirSUtoAU
710.3.3.1.3
(*ServiceParameters 3)
Applicable to SU only. Sets the Maximum
Information Rate (MIR) from SU to AU.
Integer
32–2200 (Kbps)
Must be higher than *CirSUtoAU
*CirAUtoSU
710.3.3.1.4
(*ServiceParameters 4)
Applicable to SU only. Sets the Committed
Information Rate (CIR) from AU to SU.
Integer
0–2200 (Kbps)
Must be lower than *MirAUtoSU
*CirSUtoAU
710.3.3.1.5
(*ServiceParameters 5)
Applicable to SU only. Sets the Committed
Information Rate (CIR) from SU to AU.
Integer
0–2200 (Kbps)
Must be lower than *MirSUtoAU
*MaxDelay
710.3.3.1.6
(*ServiceParameters 6)
Applicable to SU only. Sets the maximal time
packets may be delayed by the CIR\MIR
mechanism. Above the configured maximal
period the packets are discarded.
Integer
300 – 10,000 (milliseconds)
*MaxBurstDuration
710.3.3.1.7
(*ServiceParameters 7)
Applicable to SU and AU. Sets the maximum
time during which ìinactivity bonusî time can be
accumulated for future burst transmissions.
Integer
0 – 2000 (milliseconds)
*GracefulDegradationLimit
710.3.3.1.8
(*ServiceParameters 8)
Applicable to AU only. Sets the maximum limit
for activating the graceful degradation algorithm.
Integer
0 – 70 (%)
Object OID (Location in parenthesis) Description