Instruction manual

Introduction
1-3
BreezeACCESS Version 4.3 System Manual
 INT (International) Option – The available band ranges from
5.725 GHz to 5.850 GHz. Two hopping sequence selection modes
are supported as follows:
a. INT ISM mode: This option supports the standard ISM US FCC
Frequency Hopping sequence that includes 79 frequencies.
Synchronization among AUs is supported.
b. Flexible Hopping Mode: Enables the selection of hopping
frequencies in the supported range. Synchronization among
AUs is supported.
A BreezeACCESS-based system consists of the following:
 Customer Premise Equipment (CPE) – BreezeACCESS Subscriber
Units.
 Base Station Equipment (BSE) – BreezeACCESS Access Units and
supporting equipment.
 Networking Equipment – Standard Routers and/or
Gateways/Gatekeepers supporting connections to the Internet
and/or the PSTN or private telephony network.
 Management Systems – SNMP based Management, Billing and
Customer Care, and other Operations Support Systems.