Instruction manual
2-98
BreezeACCESS Version 4.3 Operations and Administration
Manual Revision: 4.0
into the IP address and to register its own phone number and IP
address with the Gatekeeper.
The default selection is Disable.
GateKeeper/GateWay IP Address – Specifies the IP address of the
Gateway/Gatekeeper. If the Gatekeeper Option parameter (see
above) is set to Enable, an IP address must be specified.
The default value is 0.0.0.0.
Alternate Gatekeeper Option - Enables or disables the Alternate
Gatekeeper feature. For the purposes of ensuring system
availability, redundancy, and scalability, the Gatekeeper may
provide the RAS signaling function by utilizing multiple physical or
logical devices, referred to as Alternate Gatekeepers.
If the Alternate Gatekeeper Option set to Automatic Discover, the
Alternate Gatekeeper IP address is received from the Primary GK.
Otherwise, in Manual Discovery mode the Alternate Gatekeeper IP
address is specified by the Alternate Gatekeeper IP Address
parameter (see below).
Valid selections: Disable, Enable (Automatic Discovery), Enable
(Manual Discovery).
Default selection is Disable.
Alternate Gatekeeper IP Address – Sets the Alternate Gatekeeper
IP address when Alternate Gatekeeper Option parameter (see above)
is set to Manual.
The default value is 0.0.0.0.
Telephone Number – The telephone number as specified in the
Gateway (if it is required by the specific type of Gateway used).
Valid values: up to 10 digits (0-9).
The default number is 0000....0 (10 zeros).
H323 Terminal ID – The H323 Terminal ID (Name) to be used for
calling the terminal when the caller uses this feature (e.g.
NetMeeting).
Valid values: up to 24 characters.
The default selection is X (No H323 Terminal ID).
IP Dialing Option – Enables or disables dialing using IP addresses.
The default selection is Enable.
IP Dialing Indicator – Specifies the prefix used to identify an IP
Dialing string. Applicable only if the IP Dialing Option parameter (see
above) is set to Enable. Digits dialed after IP Dialing Prefix are
NOTE:
When using a Gateway without a Gatekeeper, this number must be predefined in the
Gateway