Instruction manual

Menus and Parameters
2-77
BreezeACCESS Version 4.3 System Manual
Valid values are 0-7.
The default value is 0.
 VLAN Priority – Management (AU, SU and GU)– Displays
and sets the value of the VLAN Priority field for management
frames in units with a VLAN ID- Management (or VLAN ID –
Management & Voice) value other than 65535. In the unit all
management frames are routed to the High queue. This
parameter only impacts the way that other VLAN-aware
devices will handle the packet.
Valid values are 0-7.
The default value is 4 for SU units with voice support and 0
for all other units.
 VLAN Priority – Voice (SU with voice support only) –
Applicable for all link types. Displays and sets the value of
the VLAN Priority field for voice frames (RTP packets). In the
unit all voice frames (RTP packets) are routed to the High
queue. This parameter only impacts the way that other
VLAN-aware devices will handle the packet. In units with
VLAN ID – Voice & Management of 65535 (No VLAN), if the
Voice Priority Tag Option enabled, then a Priority Tag that
includes the value of the VLAN Priority – Voice parameter
and a zero value in the VID field will be inserted into all voice
frames (RTP packets) generated by the unit before
transmission to the Wireless or Ethernet port.
Valid values are 0-7.
The default value is 6.
 VLAN Priority Threshold (AU and SU) – Applicable for
trunk and hybrid links only. Displays and defines the value
of the VLAN Priority Threshold. This parameter impacts the
way that the unit will handle tagged packets that are
received from the Ethernet port.
Since the system supports both Layer 2 and Layer 3
prioritization, a frame will be routed to the Mid queue if one
of the following conditions is met:
a. The precedence in the ToS field is higher than the value of
the ToS Precedence Threshold parameter (applicable to
both tagged and untagged frames).
b. The VLAN Priority field in a tagged frame is higher than
the value of the VLAN Priority Threshold parameter.
Valid values are 0-7.
NOTE:
Packets Received from the Ethernet port with a ToS Precedence value
higher than the ToS Precedence Threshold defined will be routed to the Mid
queue.