Instruction manual
Menus and Parameters
2-75
BreezeACCESS Version 4.3 System Manual
VLAN Forwarding Support – Enables or disables the VLAN
Forwarding feature.
Available selections are Disable and Enable.
The default selection is Disable.
Add Forwarding VLAN ID – Adds a VLAN ID to the VLAN
Forwarding List. One VLAN ID can be entered each time. The
maximum number of VLAN IDs in the VLAN Forwarding List
is 20.
Valid values are 1 to 4094.
Remove Forwarding VLAN ID – Removes a VLAN ID from
the VLAN ID Forwarding List.
Valid values are VID values (from 1 to 4094) that are
included in the VLAN Forwarding List.
Show VLAN ID Forwarding List – Displays the values of the
VLAN IDs that are included in the VLAN Forwarding List.
VLAN Relaying (AU only) – Applicable for Trunk link only.
Defines the VLAN ID values that will be included in the VLAN
Relaying List. If the Link Type is defined as Trunk Link and the
VLAN Relaying option is enabled, a received wireless link relayed
frame (a frame received from the wireless link that should be
transmitted back through the wireless link) with a VLAN ID that
is not a member of the unit’s VLAN Relaying List, will be
discarded. If VLAN Forwarding Support is also enabled, it is
necessary to configure all the VLAN IDs in the Relaying List also
in the Forwarding List to enable the relaying operation.
The VLAN Relaying menu provides the following options:
VLAN Relaying Support – Enables or disables the VLAN
Relaying feature.
Available selections are Disable and Enable.
The default selection is Disable.
Add Relaying VLAN ID – Adds a VLAN ID to the VLAN
Relaying List. One VLAN ID can be entered each time.
The maximum number of VLAN IDs in the VLAN Relaying
List is 20.
Valid values are 1 to 4094.
Remove Relaying VLAN ID – Removes a VLAN ID from the
VLAN ID Relaying List.
Valid values are VID values (from 1 to 4094) that are
included in the VLAN Relaying List.
NOTE:
If the VLAN ID Forwarding List is empty and the VLAN Forwarding Support is
enabled, then all data frames will be discarded.