Instruction manual

2-40
BreezeACCESS Version 4.3 Operations and Administration
Manual Revision: 4.0
the base sequence. For example, if the Frequency Offset is 10,
channel 2 will be at 5737 MHz (5727 + 10).
The permitted range in ISM US FCC is 0 to 45 (MHz). In ISM
International mode the valid range is 0 to 70 (MHz).
The default value is 0 (MHz).
 Flexible Hopping Definition –Adds and removes frequencies
to/from the list of hopping frequencies; displays the selected
hopping frequencies and the current hopping sequence (based on
the previous selections made before the last reset). The new
selections will come into effect only after the next reset.
The default sequence (including the case where all frequencies were
deleted) is:
5.2 GHz series: 5153 MHz
5.7 GHz series: 5726 MHz
 Add Frequencies – Adds discrete hopping frequencies or
frequency ranges. Enter a list of frequencies and/or frequency
ranges to be added. Use a comma to separate between entries
(no spaces).
 5.7 GHz series: The allowed entries are from 5725 to 5850
in steps of 1 MHz.
Example: Enter 5725 - 5730, 5735 in the list to add the
frequency channels 5725, 5726, 5727, 5728, 5729, 5730
and 5735 MHz.
 5.2 GHz series: The available range is from 5151 to 5350
MHz using a 1 MHz grid. The minimum distance between
channels is 2 MHz.
Example 1: Adding the band 5151- 5160 is equivalent to
adding the discrete frequencies 5151, 5153, 5155, 5157 and
5159 MHz.
Example 2: Adding the band 5152 - 5160 is equivalent to
adding the discrete frequencies 5152, 5154, 5156, 5158 and
5160 MHz.
Example 3: A trial to add 5152 - 5160, 5161 will be rejected
because it does not meet the requirement for a minimum
distance of 2 MHz between channels.
 Remove Frequencies - Removes frequencies from the existing
list. Enter a list of frequencies and/or frequency ranges to be
removed, using the same guidelines as in Add Frequencies
above. When a frequency range is removed, all frequencies in the
range that are included in the list of frequencies to be used, are
NOTE:
In some countries the permitted range is from 5725 to 5875 MHz..