Instruction manual

2-36
BreezeACCESS Version 4.3 Operations and Administration
Manual Revision: 4.0
Advanced Configuration Menu
The Advanced Configuration menu provides access to all the
parameters, including the parameters that are available through the
Basic Configuration menu.
The Advanced Configuration menu provides access to the following
menus:
 IP Parameters (AU, SU and GU) (see page 2-36
)
 Air Interface Parameters (AU and SU) (see page 2-37
)
 Network Management Parameters (AU, SU and GU) (see page 2-66
)
 Bridge Parameters (AU and SU) (see page 2-69
)
 VLAN Parameters (GU) (see page 2-69
)
 Performance Parameters (AU and SU) (see page 2-82
)
 Service Parameters (AU and SU) (see page 2-86
)
 RADIUS Parameters (SU) (see page 2-90
)
 Security Parameters (AU and SU) (see page 2-94
)
 Voice Parameters (SU with voice support) (see page 2-96
)
 Dialing Parameters (SU with voice support) (see page 2-97
)
 Telephony Signals Parameters (SU with voice support)
(see page 2-104
)
 Hopping Parameters (GU) (see page 2-110
)
 Alarm Parameters (GU) (see page 2-112
)
IP Parameters (AU, SU and GU)
The IP Parameters sub-menu allows configuration of the following
parameters:
 IP Address – Displays the current IP address of the unit and allows
the entry of a new IP address.
The default IP Address is 10.0.0.1.
 Subnet Mask – Displays the current subnet mask of the unit and
allows entry of a new subnet mask.
The default mask is 255.0.0.0.
 Default Gateway Address – Displays the current address of the
default gateway of the unit and allows entry of a new default
gateway address.
The default is 0.0.0.0.