Instruction manual

2-4
BreezeACCESS Version 4.3 Operations and Administration
Manual Revision: 4.0
 Console Speed – Displays the speed defined in the unit for the
connected terminal, used for running the terminal emulation
program.
 Number of Associations Since Last Reset – For SUs - displays the
total number of associations with any AU since the last reset,
including duplicate associations with the same AU.
For AUs - displays the number of SUs that have associated with the
AU since the last reset, including duplicate associations with the
same SU.
The following parameters appear for Subscriber Units only:
 Voice Hardware Version (SU with voice support only) – Displays
the hardware version of the voice module.
 Unit Status – Displays the current status of the SU. There are two
possible values:
SCANNING – The SU is searching for an AU with which to
associate.
ASSOCIATED – The SU is associated with an AU.
 AU MAC Address – Displays the MAC address of the AU with which
the unit is currently associated. If the unit is not associated with
any AU, the address will be that of the IEEE broadcast address:
FF-FF-FF-FF-FF-FF.
The following parameter appears for Access Units only:
 Current Number of Associations – Displays the total number of
SUs associated with this AU. This number may include units that
are not currently active, as there is no aging algorithm for
associated SUs.
NOTE:
An SU will be removed from the list of associated SUs only upon occurrence of any of
the following: (1) The AU received from another AU a SNAP frame with the SU MAC
address indicating that the SU has become associated with the other AU, or (2) The AU
has decided that the SU aged out following its failure to acknowledge a certain number
of consecutive frames transmitted to it.