User`s guide

The DS.11 Configuration Utility
3-27
4. Click Advanced to change the settings of the TFTP session used in the
upgrade download. The Advanced TFTP setup window is described in the
following page.
5. Click Start to initiate the firmware upgrade; progress bars are displayed
indicating the progress of the operation. If both BU-DS.11 and
RB-DS.11 devices are selected, the program will upgrade RB-DS.11 units first.
At the end of the upgrade session, the following window is displayed indicating that
the operation was successful.
Figure 3-18: Firmware Upgrade Process
NOTES:
Do not disconnect any cables or try to stop the process before downloading is completed.
All configured parameters are saved during the upgrade/download procedure.
Advanced TFTP Settings
This section describes how to configure advanced parameters when using the
firmware upgrade utility.
Figure 3-19: Advanced TFTP Setup
The Advanced TFTP Setup window enables you to tune the TFTP session
parameters for a more efficient firmware upgrade, depending on your actual
deployment.