Instruction manual

Indoor SU-R Units
2-7
BreezeACCESS Version 4.5 System Manual
1. Plug the output jack of the power transformer into the DC input jack (marked
DC IN) located on the bottom panel of the unit.
2. Connect the supplied universal power transformer to a power outlet -110/
220VAC.
3. Use a straight Ethernet 10BaseT cable to connect the Ethernet port (marked
ETH) to a PC or to a hub’s uplink port. Use a crossed Ethernet10BaseT
cable to connect to a hub.
4. For units with voice support, use the standard RJ 11 cable connected to the
telephone set to connect the telephone to the telephone port (marked TEL).