Instruction manual

1-8
BreezeACCESS Version 4.5 Installation
Manual Revision: 1.0
Table 1-4: SU-RA/RE Bar Display Description
Figure 1-2: AU-RA/RE Bottom Panel
Table 1-5: AU-RA/RE LEDs
LED Description Functionality
Yellow LED Power On – power is present
Off – power is not received from the
indoor unit
8 Green LEDs Received signal strength
indication
Received RF signal level indication in
4 dB resolution, starting from –91
dBm
Red LED High RF signal level Received signal level is
–40 dBm or higher
LED Description Functionality
ETH Ethernet activity Blinking – Data received from or transmitted to Ethernet
LAN
Off – No activity on the Ethernet LAN
12V IN Power On – 12 VDC power is supplied to the unit
Off – 12 VDC power is not available
ALARM Alarm indication On – A problem with the power amplifier or in the locking
process of any of the synthesizers
Off – Normal operation