Instruction manual

Menus and Parameters
2-117
BreezeACCESS Version 4.5 System Manual
! V5 Pulse Parameters – These are the cadences used by the V5
features. Every cadence has an on period, an off period and an
index. The cadence used is determined from the index sent in the V5
message. The V5 Pulse Parameters are supported only by units
using a Voice card with HW revision D and higher. The available
parameters are:
" V5 Pulse Cadence On 1/2/3/4 – The value in ms of the on
period of the pulse.
The range is from 0 to 8000 ms. 0 means that the pulse type is
disabled.
The defaults are:
V5 Pulse Cadence On 1: 200 ms.
V5 Pulse Cadence On 2: 300 ms.
V5 Pulse Cadence On 3: 400 ms.
V5 Pulse Cadence On 4: 500 ms.
" V5 Pulse Cadence Off 1/2/3/4 – The value in ms of the off
period of the pulse.
The range is from 0 to 8000 ms. 0 means that the pulse type is
disabled.
The defaults are:
V5 Pulse Cadence On 1: 200 ms.
V5 Pulse Cadence On 2: 300 ms.
V5 Pulse Cadence On 3: 400 ms.
V5 Pulse Cadence On 4: 500 ms.
" V5 Pulse Index 1/2/3/4 – The V5 mapping index of the pulse.
The range is from 0 to 63. 0 means that the pulse type is
disabled.
The defaults are:
V5 Pulse Index 1: 0.
V5 Pulse Index 2: 1.
V5 Pulse Index 3: 2.
V5 Pulse Index 4: 3.
! Polarity Reversal Feature – This feature enables the definition of a
polarity for each major transient in the call progress state machine,
This enables association between different states and polarity
reversal events. The Polarity Reversal Feature is supported only by
units using a Voice card with HW revision D and higher. The
available parameters are:
" Polarity Reversal Support – To enable or disable the Polarity
Reversal feature.
The default is Disable.
" Polarity During Outgoing Calls – Includes Polarity reversal
parameters for various states during outgoing calls:
# Polarity in Dialing State
# Polarity in Ring Back State