Instruction manual

Menus and Parameters
2-99
BreezeACCESS Version 4.5 System Manual
Table 2-19: Ethernet Vendor Specific Record Structure
(Vendor Specific ID is 710)
Security Parameters (AU and SU)
Preventing Unauthorized Access
Unauthorized wireless connection is prevented by using the Wired
Equivalent Privacy (WEP) algorithm defined in the IEEE 802.11 Wireless
LAN standard. The WEP is based on RSA’s RC4 encryption algorithm.
The following parameters are available in the Security Parameters menu:
! Authentication Algorithm – Determines the operation mode of the
unit. The available options are:
Field Format Description
Traffic Type 1 hexadecimal digit Data (0)/Management (1)/Voice (2).
VLAN ID 3 hexadecimal digits VLAN ID.
Layer 3
Protocol
4 hexadecimal digits Third layer protocol type (IP, ARP).
Remote IP
Address
xxx.xxx.xxx.xxx (decimal
format)
The remote IP Address.
IP Type Of
Service
2 hexadecimal digits Precedence/ Delay/ Throughput/ Reliability.
VLAN Priority 1 hexadecimal digits VLAN Priority.
ETH Output
Octets
8 hexadecimal characters Number of octets successfully transmitted to
Ethernet.
ETH Input
Octets
8 hexadecimal characters Number of octets received from Ethernet.
ETH Output
Packets
8 hexadecimal characters Number of packets successfully transmitted
to Ethernet.
ETH Input
Packets
8 hexadecimal characters Number of packets received from Ethernet.
WLAN Output
Octets
8 hexadecimal characters Number of octets successfully transmitted to
Wireless.
WLAN Input
Octets
8 hexadecimal characters Number of octets received from Wireless.
WLAN Output
Packets
8 hexadecimal characters Number of packets successfully transmitted
to Wireless.
WLAN Input
Packets
8 hexadecimal characters Number of packets received from Wireless.