Instruction manual

Menus and Parameters
2-83
BreezeACCESS Version 4.5 System Manual
The Ethernet Broadcasting Filtering menu allows viewing and setting the
following parameters:
! Filter Options (SU only) – Defines the Ethernet broadcast filtering
functionality of the unit. The following options are available:
" Disable: No Ethernet broadcast filtering
" From Ethernet Only: Filter broadcast messages received from
the Ethernet port
" From WLAN Only: Filter broadcast messages received from the
wireless link port
" Both From Ethernet & WLAN: Filter broadcast messages
received from both the Ethernet port and the wireless link port
The default selection is Disable.
! DHCP Broadcast Override Filter (SU only) – Enables broadcasting
of DHCP (Dynamic Host Configuration Protocol) messages. This is
independent of the filtering option selected in Filter Options above,
meaning that even if according to the selected filtering option,
broadcast messages should be filtered, DHCP broadcasts will be
transmitted if the Enable DHCP Broadcast option is selected.
Available selections are:
" Disable– DHCP Broadcast messages will be filtered or
transmitted according to the general filtering criteria set by the
selected value of the Filter Options parameter.
" Enable– DHCP Broadcast messages will be transmitted
regardless of the selected value of the Filter Options parameter.
The default selection is Disable.
! PPPoE Broadcast Override Filter (SU only) – Enables broadcasting
of PPPoE (Point-to-Point Protocol over Ethernet) messages. This is
independent of the filtering option selected in Filter Options above,
meaning that even if according to the selected filtering option
broadcast messages should be filtered, PPPoE broadcasts are
transmitted if the Enable PPPoE Broadcast option is selected.
Available selections are:
" Disable– PPPoE Broadcast messages is filtered or transmitted
according to the general filtering criteria set by the selected
value of the Filter Options parameter.
" Enable– PPPoE Broadcast messages is transmitted regardless of
the selected value of the Filter Options parameter.
The default selection is Disable.
! ARP Broadcast Override Filter (SU only) –When this option is set
to Enable ARP Broadcast, broadcasting of ARP messages is
independent of the filtering option selected in Filter Options above.
This means that ARP broadcasts are transmitted regardless of
which filtering option is selected for broadcast messages.