Instruction manual

Menus and Parameters
2-79
BreezeACCESS Version 4.5 System Manual
# Show VLAN ID Forwarding List – Displays the values of the
VLAN IDs that are included in the VLAN Forwarding List.
" VLAN Relaying (AU only) – Applicable for Trunk link only.
Defines the VLAN ID values that will be included in the VLAN
Relaying List. If the Link Type is defined as Trunk Link and the
VLAN Relaying option is enabled, a received wireless link relayed
frame (a frame received from the wireless link that should be
transmitted back through the wireless link) with a VLAN ID that
is not a member of the unit’s VLAN Relaying List, will be
discarded. If VLAN Forwarding Support is also enabled, it is
necessary to configure all the VLAN IDs in the Relaying List also
in the Forwarding List to enable the relaying operation.
The VLAN Relaying menu provides the following options:
# VLAN Relaying Support – Enables or disables the VLAN
Relaying feature.
Available selections are Disable and Enable.
The default selection is Disable.
# Add Relaying VLAN ID – Adds a VLAN ID to the VLAN
Relaying List. One VLAN ID can be entered each time.
The maximum number of VLAN IDs in the VLAN Relaying
List is 20.
Valid values are 1 to 4094.
# Remove Relaying VLAN ID – Removes a VLAN ID from the
VLAN ID Relaying List.
Valid values are VID values (from 1 to 4094) that are
included in the VLAN Relaying List.
# Show VLAN ID Relaying List – Displays the values of the
VLAN IDs that are included in the VLAN Relaying List.
" VLAN Traffic Priority (AU and SU) – Each packet to be
transmitted to the wireless link is transferred to one of three
queues: Low, Mid and High. Packets in the High queue have the
highest priority for transmission, and those in the Low queue
have the lowest priority.
NOTE:
If the VLAN ID Forwarding List is empty and the VLAN Forwarding Support is
enabled, then all data frames will be discarded.
NOTE:
If the VLAN ID Relaying List is empty and the VLAN Relaying Support is
enabled, then all wireless link relayed data frames will be discarded.
If the VLAN ID Relaying List and Forwarding List Support are both enabled,
all the VLAN IDs configured in the Relaying List must also be configured in
the Forwarding List.