Instruction manual

Menus and Parameters
2-61
BreezeACCESS Version 4.5 System Manual
Table 2-10: Transmit Power Output in New AU Outdoor Units
! Power Level - Applicable to all SU-R units and to SU-I/AU-I units
with HW version C or lower. Sets the transmit level according to the
unit’s specifications.
In SU-R units there are two options:
" High – An output power level to the antenna port of 28 dBm
" Low – An output power level to the antenna port of 17 dBm
In SU-I/I-D and AU-I/I-D there are two options:
" High– An output power level to the antenna port of 17 dBm
" Low – An output power level to the antenna port of 10 dBm
The default is High.
Transmit Power Control Outdoor Unit Power (dBm)
15 26.7
14 26
13 24.5
12 23
11 20.8
10 19.2
9 17.2
8 15.5
7 12.1
6 11.3
58.2
46.5
34.3
22.8
11
0 -0.2
NOTE:
To comply with specific regulatory requirements, certain units may be supplied with
the Power Level parameter set to Low, without the option to change it to High. In
such units the Power Level parameter is not available.