Instruction manual

Menus and Parameters
2-3
BreezeACCESS Version 4.5 System Manual
Info Screens Menu
Figure 2-1: Info Screens Menu
The Info Screens menu enables viewing of the current values of various
parameter sets. The parameter sets are identical to the main parameter
groups in the configuration menus. The user can view a specific
parameter set or can elect to view all parameters (S). This menu is
available for all access levels.
Show Unit Status
The Show Unit Status menu displays the current values of the following
parameters:
! Unit Type – Identifies the unit’s function as one of the following:
Access Unit, Subscriber Unit or GPS and Alarms Module.
! Unit MAC Address – Displays the unit’s unique IEEE MAC address.
! Unit Ethernet Port Operational Status - Displays the current
operational status of the Ethernet port: Up (Ethernet link identified
on Ethernet Port), Down (No link identified on Ethernet Port) or
Testing (a temporary status).
! Unit Hardware Version – Displays the hardware version of the unit
(the indoor module of IF based products).
! Flash Type – Displays the type and size of the Flash memory.
! Flash Versions
" Current Version – Displays the software version that is
currently active.
" Shadow Version – Displays the software version currently
defined as the shadow (backup) version.
BreezeACCESS/AU-BS
Official Release Version – 4.5.5
Release Date: Wed Jan 07 13:30:52 2004
Info Screens
====================
1 – Show Unit Status
2 – Show Basic Parameters
3 – Show Advanced Parameters
S – Show All Parameters
>>>