Instruction manual

1-4
BreezeACCESS Version 4.5 Operations and Administration
Manual Revision: 1.0
Screens option is displayed. Users with this access level cannot
access the Unit Control, Basic Configuration, Site Survey and
Advanced Configuration menus.
! For users with Installer access rights, the first four menu items
(Info Screens, Unit Control, Basic Configuration and Site Survey) are
displayed. Users with this access level cannot access the Advanced
Configuration menu.
! For users with Administrator access rights, the full Main Menu will
be displayed. These users can access all the menu items.
Operating the Monitor
Program
1. Type an option number to open/activate the option. You may need to press
Enter in some cases.
2. Press Esc to exit a menu or option.
3. You can log-out and exit the monitor program from the Main Menu by
selecting X (exit). To get to the Main Menu from anywhere in the program,
press the Esc key several times. You can also exit the monitor from
anywhere in the program by simultaneously pressing the Ctrl and X keys.
4. Reset the unit after making configuration changes for the new values to take
effect.
NOTE:
The Main Menu of the GU-BS (GPS and Alarms module) does not include the Basic
Configuration option.
NOTE:
The program will terminate automatically after a given period of inactivity specified by
the Log-Out Timer parameter.
NOTE:
Most parameters take effect only after the unit is reset. However, some parameters
take effect immediately (run-time configurable). Appendix D includes information on all
parameters, including which are run-time configurable.