Instruction manual

4-6
BreezeACCESS Version 4.5 Commissioning
Manual Revision: 1.0
BS-AU LEDs
Table 4-6: BS-AU LEDs
BS-GU LEDs
Table 4-7: BS-GU LEDs
Name Description Functionality
PWR Power supply
12 VDC
On – After successful power up, indicating that 12 VDC is
supplied to the outdoor unit.
Off – Power off or DC/DC converter failure (12 VDC not
supplied to the outdoor unit)
WLNK Wireless link
activity
Blinking – Receiving packets from the wireless media
Off – No reception of packets from the wireless media
ALRM Alarm On – Loss of hopping synchronization (in Slave mode)
MASTER Master unit On – The unit is configured as Master
LED Name Functionality
PWR (green) On – Power supply functioning properly.
Off – Power supply not functioning properly.
OK (green) On – Proper signals are being received from the GPS antenna.
Off – The GPS antenna is not connected or it is not functioning
properly.
A1 (red) On – Alarm In 1 (external) is activated.
A2 (red) On – Alarm In 2 (external) is activated.
A3 (red) On – Alarm In 3 (external) is activated.
A4 (red) On – Alarm In 4 (external) is activated.
A5, A6 (red) Reserved for future use.