User manual

Chapter 2 - Managing a Single Device/Cell SUs Information Page (AU only)
AlvariCRAFT Device Manager 75 User Manual
2.10.2 Details
The Details section displays the following read-only information for a selected SU:
SU Name The Unit Name configured in the SU (N/A for SU-EZ).
Age The elapsed time in seconds since receiving the last packet from the
SU (N/A for SU-EZ).
Distance The measured distance from the AU (N/A for SU-EZ).
Uplink SNR The SNR (in dB) of the signal received by the AU from the SU.
RSSI (dBm) The RSSI (in dBm) of the signal received by the AU from the SU (N/A
for SU-EZ).
Max Mod. Level The Maximum Modulation Level configured in the SU (N/A for
SU-EZ).
CPLD Version The version of the Complex Programmable Logic Device (CPLD)
used in the SU (N/A for SU-EZ).
Boot Version The Boot version of the SU (N/A for SU-EZ).
ATPC Option The setting of the ATPC Option in the SU: Enable or Disable (N/A for
SU-EZ).
Adaptive Modulation
Option
The setting of the Adaptive Modulation Option in the SU: Enable or
Disable (N/A for SU-EZ).
Burst Mode Option The setting of the Burst Mode Option in the SU: Enable or Disable
(N/A for SU-EZ).
Concatenation Option The setting of the Concatenation Option in the SU: Enable or Disable
(N/A for SU-EZ).
Security Mode The setting of the Security Mode in the SU: WEP, AES or FIPS 197
(N/A for SU-EZ).
Authentication Algorithm The setting of the Authentication Algorithm in the SU: Shared Key or
Open System (N/A for SU-EZ).
Data Encryption Option The setting of the Data Encryption Option in the SU: Enable or
Disable (N/A for SU-EZ).